Technical data
Understand
the capability.
Every dimension, mass, speed and force, measured in accordance with the ISO 7176 series, and the standards Omni is tested to.
- Manufacturer
- Conquering Horizons Limited
- Model
- Omni
- Wheelchair class
- UK Class 3 Mobility Device (Road Legal)
Specifications
| Maximum occupant mass | 130kg |
|---|---|
| Overall length | 1000mm / 39.4" |
| Overall width | 670mm / 26.4" |
| Folded length | 970mm / 38.2" |
| Folded height | 658mm / 25.9"Seatback folded down, cushion removed |
| Seat height (low) | 585mm / 23" |
| Seat height (high) | 910mm / 35.8" |
| Seat raise | 325mm / 12.8" |
| Total mass | 146.4kg / 322.7lbs |
| Minimum turning radius | 622mm / 24.5" |
| Maximum speed forwards | 6.4km/h / 4mph (Pavement Mode) · 12.8km/h / 8mph (Road Mode) |
| Static stability downhill | 25° (Ride-Height) · 24° (Elevated) |
| Static stability uphill | 15° (Elevated) |
| Obstacle climbing | 130mm / 5.1" maximum |
| Ground clearance | 110mm / 4.3" |
| Water traverse | 50mm / 2" maximum |
Battery
| Battery voltage | 48V |
|---|---|
| Battery chemistry | Lithium-Ion |
| Battery capacity | 39Ah |
| Operating temperature | 2°C to 43°C |
| Range | > 48km / 30 miles |
Operating forces
| Power button | 2.5N |
|---|---|
| Switches | 3.5N |
| Joystick | 3N |
| Display controller bezel | 3N |
| Static hold release | 150N |
| Isolator | 25.8NNot used in normal operation |
Seating
| Seat plane angle | -6° to -25°, user varied |
|---|---|
| Effective seat depth | 460mm / 18.1" minimum |
| Effective seat width | 410mm / 16.1" minimum |
| Seat surface height at front edge | 590mm / 23.2" |
| Backrest angle | Set for user |
| Backrest height | 380mm / 15" |
| Footrest to seat distance | 415mm / 16.3" minimum |
| Leg to seat surface angle | 91° |
Maintenance information
| Front wheel bolt torque | 17 Nm / 12.5 ft-lbRe-check after 5 miles |
|---|---|
| Tyre pressure (front) | 60 psi / 4.1 bar |
| Tyre size | 60-406 / 20×2.35Recommended tyre: Schwalbe Pick-Up |
| Inner tube size | 40/62-406 |
Measurements taken in accordance with the ISO 7176 series standards.
Tested to, and compliant with.
- BS EN 12184:2022Electrically powered wheelchairs, scooters and their chargers – Requirements and test methods
- BS ISO 7176-1:2014Determination of static stability
- BS ISO 7176-2:2017Determination of dynamic stability of electrically powered wheelchairs
- BS ISO 7176-4:2008Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
- BS ISO 7176-5:2008Determination of dimensions, mass and manoeuvring space
- BS ISO 7176-6:2018Determination of maximum speed of electrically powered wheelchairs
- BS ISO 7176-8:2014Requirements and test methods for static, impact and fatigue strengths
- ISO 7176-9:2009Climatic tests for electric wheelchairs (not tested, OEM data read across)
- ISO 7176-19Wheeled mobility devices for use as seats in motor vehicles — crash test approved
Documents. View online or download.
- Omni user manualSet-up, driving modes, charging, maintenance and troubleshooting.PDF
- Omni seating detailsSeat, backrest, armrest and footrest adjustment ranges.PDF
- Omni warranty policyWhat the 2-year comprehensive warranty covers.PDF
- Omni service policyAnnual servicing and the 72-hour servicing and repair packages.PDF
Funding a purchase
Need the evidence for a funding decision?
Specifications, test standards, warranty and service terms are published here, and we will supply anything further an insurer, funder or purchasing organisation needs.